Last year in my art class, I started quite a few artworks (once I got past the stage of just 'developing ideas'), but never really finished any of them. I took photos along the way though, and thought it was about time to put them out into the ether...
Joan, the Guitar
I found this guitar for $50 in an op-shop in Greensborough, and thought it would be a good idea to decorate it so that I could have a "fun" guitar for use in the classroom. Whilst it doesn't sound
nearly as good as Freda, my other 6-stringed friend, and it doesn't stay tuned for more than 20 minutes, it meant that I didn't have to lug Freda back and forth between home and school (I was loathe to leave her in the classroom as there had been a number of break-in thefts over weekends, plus, it meant that if I felt like heading down to the beach or out to an open-mic night on a whim, I would have to borrow a guitar from someone, and that wasn't always possible).
I wanted to decorate this little nugget of wood and nylon with some sort of image that visualised sound. I had in mind a particular Joan Miro painting that was on the front of an Erik Satie CD I listened to growing up called
"Carnival of Harleqiuns", because it always made me think of the light, complex, tripping music that Satie created. Upon looking through a book of Miro's works, however, I found a few other artworks which were going to be a bit easier to transfer to the guitar itself, and they were also a bit rougher and chunkier, which I felt suited the more rustic guitar itself.
so, the steps I went through....
1. Paint the curved edge of the guitar in an acrylic/impasto mixed medium of a light beige tone, similar to that of the background in many of Miro's works.
 |
| Step 2. Copy the design of my personal rune-shield onto the rear of the body in soft graphite. |
 |
| Step 3. Using a "piping bag" made from a snap-lock bag with a small piece of one corner cut off, trace over the design using mixture of slightly diluted impasto medium mixed with some acrylic paint. This is much like icing a gingerbread biscuit, and leaves a raised design. |
 |
| Step 4. Trace the outlines of the paintings onto sheets of baking paper. Turn over the paper and cover the reverse of the traced lines with a thick coating of graphite (6B pencil in this case). Turn the paper over again, and attach to the guitar surface. |
 |
| Step 4. cont... Trace over the lines again, pushing hard so that the graphite on the underside is transferred onto the surface underneath it. |
 |
| Step 5. Remove the baking/tracing paper. Using a fine brush and diluted Paynes Grey acrylic paint, go over the lines. |
 |
| Step 6. Again using acrylic paint, fill in the coloured areas. |
|
 |
| Step 6 |
 |
| Who needs a pallette? :) |
 |
| Step 7. (I have yet to do this) Coat the painted area with a thick varnish so it won't scuff off. As finished as it's likely to get in the next month or so... |
does this anonymous commenting actually work?!?
ReplyDeletehuh.
ReplyDeleteapparently you can also just type in a reader name, and it will let you post that way too....
ah, I see, commenting requires me to enable a bunch of scripts that I usually leave off for sites I don't visit much.
DeleteAnyway, the artwork is nicely done, and obviously it took some time and planning... I don't suppose it's easy to get carbon paper these days, can't quite place the stuff I've seen used to do the tracing stage... love the concept of piping the impasto stuff on; your average Chinese/Vietnamese "we sell everything emporium" often has real piping bags with shaped tips etc.
You could exercise your inner scientist and record a couple of chords before and after the topcoat (the mic in your laptop would probably be fine, but if you have a clip on pickup...? I think that one of the standard sound apps on the mac does a sonogram)
oh, love the palette... concept art for a future tattoo? :-P